|
Post by mueh on Jun 16, 2024 0:53:43 GMT -5
Hi George ! Override to DS with CHANGE AAA "" DS works now perfect with 24167 . There is still a problem when DS is set as default ( MODE DS ) . If no DS is specified on change cmd CS is used . ( PROFILE and Status bar show DS ) Here the result after cmd shown on cmd line . ![](//storage.proboards.com/3714814/thumbnailer/NxpuYTiBBjsKsF0KcXni.png) Thanks
|
|
|
Post by George on Jun 16, 2024 8:55:17 GMT -5
MUEH: Damn! I specifically tested that with your sample file and it worked fine. I'm losing my mind. That's what I meant when I said it seems to have fixed both problems. Back into the code I go.
George
[UPDATE]
OK, found it. It was part of moving CS/DS and WORD/CHAR to the MODE command. There was an extra reset being done elsewhere that was no longer necessary. I'll post 24168.
[/UPDATE]
|
|
|
Post by Robert on Jul 27, 2024 14:51:29 GMT -5
George, I am trying to install V3 on my "mainframe" machine, and it wouldn't run because it couldn't find "thincore" or something. I realized I didn't download the "V3 Installer" thing, but when I tried to do it, the link doesn't work. Maybe you assumed everyone who needed the "First V3" thing already got it? Well, on this machine, I haven't. Can you put this thing back so I finish installing V3?
|
|
|
Post by George on Jul 27, 2024 15:49:58 GMT -5
Robert: The official V3 installer from the web site should be all you need.
What is it failing on?
George
|
|
|
Post by Robert on Jul 27, 2024 22:53:00 GMT -5
George, if you go back to page 1 of this thread, there is a link to SPFLite3 Installer. If you click on that, you get a Google Drive message of "Sorry, the file you have requested does not exist."
I tried it again to make sure I was doing it right. You can't right-click on the link and do the Save Link As, all that will do is try to save some HTML file. It doesn't work any more.
R
|
|
|
Post by George on Jul 28, 2024 8:33:25 GMT -5
Robert: That link was for Beta testing V3. When it was released officially, all Beta files are removed. Just get the official release from the download page of the SPFLite website.
I don't want to remove the thread (we'd lose all comments) but maybe I should remove the links.
George
|
|
|
Post by Robert on Jul 28, 2024 10:10:18 GMT -5
OK, I guess I forgot it was there, I was fixated on grabbing from the forum page. Thank for your help.
R
|
|
|
Post by Robert on Jul 28, 2024 11:55:19 GMT -5
George, so I ran the V3 installer from the standard download page, but it didn't copy over any CONFIG data. did I do something wrong?
R
|
|
|
Post by George on Jul 28, 2024 12:49:24 GMT -5
Robert: COPY? Copy what? If you had an SPFLite previous version installed, your \Documents\SPFLite folder would have been there and been used. Both V2 and V2 share and use the same config stuff. V2 lives in the SPFLite2 folder, V3 in the SPFLite3 folder and BOTH share the \Documents\SPFLite folder.
George
|
|
|
Post by Robert on Jul 28, 2024 12:55:40 GMT -5
But that's just it. I *DID* have a V2, and NONE of the V2 settings were carried over. For instance, none of the V2 keyboard settings exist in V3. Thus the question, what did I do wrong?
R
|
|
|
Post by George on Jul 28, 2024 13:05:23 GMT -5
Robert: Mystery! The CFG file from V2's usage should have simply been picked up and used by V3. It sounds like your V3 simply created a new CFG file because it couldn't find the \SPFLite\SPFLite.CFG file.
Did you do an uninstall and cleanup before installing V3?
Regardless, ship the whole \SPFLite folder from your laptop and replace the existing one.
George
|
|
|
Post by Robert on Jul 28, 2024 13:36:18 GMT -5
ok I will try that.
R
|
|
|
Post by Robert on Jul 28, 2024 17:47:25 GMT -5
YEP, that worked. :-))
R
|
|